retic 4

Retic Repairs

When carrying out retic repairs across Perth suburbs we come across a wide variety of problems. On any given day, we are servicing retic systems from Mandurah to Joondalup and everywhere in between! We work on all manner of systems, from new housing estates to very large old properties where the retic system can be more than 30 years old and has been worked on by many tradesmen over the years, added to and modified, which makes for very interesting problem solving! Some of the oldest systems have galvanized metal piping and metal sprinkler heads coming off a huge 5 horse power bore!

Common problems we are called out to:

  • Nothing working
  • Broken wires
  • Solenoids staying on all the time and not switching off
  • Sticking valves
  • Drop in pressure
  • Coverage issues- areas greener than others and other areas dry
  • Solenoids not working at all-some areas not turning on
  • Controller setting issue – not doing what it is supposed to
  • Areas not turning on – this can be a valve-wire, controller or kinked pipe issue
  • Sprinkler heads not operating correctly
  • Full overhauls and modifications of reticulation systems
  • General servicing and maintenance
  • Waterwise retic conversions
  • Lowering sprinklers to the correct height to avoid the lawn mower man breaking them (sometimes this entails installing a taller pop up so that it still pops up nice and high to cover correctly)
  • Raising sprinklers to the right heights
  • Bore repairs and maintenance including electrical
  • Additions to existing systems
  • Fixing complicated retic problems

Having the right equipment and materials is important for reticulation repair work.

One of things we are most known for is our problem solving. We specialize in solving difficult issues. If your retic has you stumped, then come to us! We have the correct equipment to test the circuit on each of your solenoids, to locate your broken wiring and solenoid valves and we can also test the output coming from your controller to ensure its sending a signal. We have a range of specialist parts once we have identified a problem to assist us in resolving it.

1. Wiring Issues

Sometimes a wire is so corroded and broken in so many parts its unable to be repaired or it runs under concrete or a building and the break is under the concrete or building. A valve needs its own independent wire to operate. In both cases, it is either going to be very costly or impossible. So how do we resolve this?

We can install an Add A Station. This is a device that can run two valves independently from one wire. We take the wire from a working valve and use it for the Add A Station. The Add A Station will then independently run both valves, the working one and the one with the broken wire.

2. Splitter Station

When there are multiple breaks we can install a Splitter Station. This is a device which can run 4 valves or less off one wire but cannot run them independently. We basically set the controller for 4 times as long on one station, once it’s run a cycle the splitter station evenly divides up the time between the remaining stations.

The problem with this set up is it’s a bit more difficult to understand and every time you run a test cycle it resets itself and will divide itself evenly by whatever time you set it for at the end of the station run time.

Both the Add A Station and the Splitter Station are invaluable when it comes to solving difficult or impossible wiring situations and should be part of every retic professionals repair kit

3. Retic has low pressure?

We have special low pressure nozzles which can, in the right situations, double or triple the coverage you have. Rather than spending a whole day adding in more solenoids, installing a larger controller, and then finding where all the pipes are to split up your system,simply installing these low pressure and water efficient heads may quickly and very effectively solve your issue. They work kind of like when you start restricting the flow of a hose with your finger which makes it spray further even though you are letting out less water. Water wise Rotary nozzles use a lot less water and therefore must be run a lot longer. The Water Corporation has guidelines on how long each type of sprinkler can run for:

We recommend and use the Hunter MP Rotator. This is a sprinkler with heavy droplets and an even spread that applies the water slowly to reduce run off and avoid misting and excessive evaporation. See our detailed web page here that explains them and has video’s and pictures.

To summarize, get the right company for your servicing and reticulation repairs in Perth. Here at Luke’s landscaping we have the knowledge, expertise, equipment and materials to assist you. Customer service is extremely important to us in our dealings with you and we offer a warranty on all our work. We have many more examples of materials and equipment that can assist you. Check out the rest of our website for more information.

Call us on 0424 133 950 or email us at service@lukeslandscaping.com.au to see how we can help

Need Us To Help With Your Garden?

ARE YOU LOOKING FOR SOMETHING ELSE?

6

Do I need council approval for my outdoor renovation?

If you find yourself asking this age-old question, these days there is a high probability that will need council approval.
Close proximity living, enormous houses, tiny parcels of land & ambiguous interpretations of the residential design codes. It’s a recipe for disaster & of course there is going to be a dispute on the horizon.

Read More »
14 bushmead landscape 9 of 22

Do I need a landscape designer?

If you’re in the process of building a new custom home or considering significant renovations to your existing home, there will be a critical point in your early decision-making process which we would like to shed some light on – the landscaping. Once you really think about it, this entire project is going to be one of the most significant investments of your life! Knowing you are investing wisely is crucial for a successful outcome.

Read More »
retrofitting existing reticulation

How to Correctly Install Pop-Up Sprinklers

Broken and ineffective Pop-Ups are perhaps the most common issue with residential irrigation systems in Perth.We’ve all seen that telltale stream of water running down the street, just wasting buckets of precious water.And we’ve all been guilty of letting our lawn grow so tall that it blocks the spray, leaving green patches around each sprinkler and the rest of the lawn yellow.

Read More »

Google Reviews from Our Customers